Installation Sheet

5
Giagni
TRADITIONAL FLOOR MOUNT TUB FAUCET
NSF /ANSI 61
T-HLVR
T-HPLV
T-HCRS
11
9
11
11
17
White Porcelain
Step 1
Screw #11 handle hub onto hot/cold cartridges
#9 and #17. Disassemble handle and install
onto cartridge by securing with screw included.
Reassemble handle.
Step 2
Attach hot and cold risers U-FRSR to union nuts
on back of faucet body using one #10 rubber
gasket on each riser.
1/2" Pipe Nipple (Not Supplied)
Cone Washer
Metal Washer
Nut
Esctcheon
Tub
Nut
Washer (10)
Lock Nut
Rubber Seal Washer
Cone Washer
Flange is at top of tube
U-FRSR
T-FB1
Union Nut
U-FSUP
NOTE: U-FSUP SUPPLY LINES CAN BE CUT
TO CORRECT HIEGHT. MAKE SURE TO CUT
FROM BOTTOM OF TUBE.
Step 3
Attach #1 handshower holder with
#2 rubber gasket to outlet above
diverter handle.
2
1
Notes:
1. Faucet is not for use on concrete oors.
2. Please ensure all local plumbing codes are observed during installation
3. Water supply lines must be roughed in on 8” centers.