Installation Sheet

2
Giagni
TRADITIONAL DECK MOUNT TUB FAUCET
T-HLVR
T-HPLV
T-HCRS
11
9
11
11
17
White Porcelain
Step 1
Screw #11 handle hub onto hot/cold cartridges
#9 and #17. Disassemble handle and install
onto cartridge by securing with screw included.
Reassemble handle.
Step 2
Attach T-DLBO deck elbows to union nuts on
back of faucet body using one #10 rubber gasket
on each elbow.
Step 3
Insert faucet through holes in tub rim with #20
seal washer above the deck and secure with #21
locknut. NOTE: If your tub does not have faucet
holes use a 1” hole saw and drill holes in deck
centered across the overow hole on 8” centers.
Notes:
1. Please ensure all local plumbing and building codes are observed when installing
these faucets.
2. Water supply lines must be roughed in on 8” centers.
1/2" Pipe Nipple (Not Supplied)
Cone Washer
Metal Washer
Nut
Esctcheon
Tub
Nut
Washer (10)
Lock Nut
Rubber Seal Washer
Cone Washer
Flange is at top of tube
T-DLBO
T-FB1
Union Nut
U-FSUP
NOTE: U-FSUP SUPPLY LINES CAN BE CUT
TO CORRECT HIEGHT. MAKE SURE TO CUT
FROM BOTTOM OF TUBE.
1/2" Pipe Nipple (Not Supplied)
Cone Washer
Metal Washer
Nut
Esctcheon
Tub
Nut
Lock Nut (21)
Rubber Seal
Washer (20)
Cone Washer
Flange is at top of tube
T-DLBO
T-FB1
Union Nut
U-FSUP
NOTE: U-FSUP SUPPLY LINES CAN BE CUT
TO CORRECT HIEGHT. MAKE SURE TO CUT
FROM BOTTOM OF TUBE.