Installation Guide

TRADITIONAL DECK MOUNT TUB FAUCET (cont.)

Step 5

Attach #1 hand shower holder

with #2 rubber gasket to outlet

above diverter handle.

Step 4

Cut U-FSUP supply lines to correct height for application

and attach to threaded shank of faucet. (NOTE: Supply

lines must be cut from bottom of tube) Connect preferred

½” pipe, supplied by installer, into female threaded nut at

bottom of supply line to make hot/cold water connections.

NSF /ANSI 61

Step 6

Attach small end of #18 hand

shower hose with #28 washer to

outlet on side of #1 hand shower

holder.

Step 7

Attach large end of #18 hand

shower hose with #28 washer to #6

hand shower and place in #1 holder.

Step 8

Turn on water and check all

connections for leaks.

T-FB1

Union Nut

T-DLBO

Cone Washer

Flange (top of tube)

Nut

U-FSUP

Tub

Escutcheon

For optional shut off

Nut

valve installation see

Metal Washer

Cone Washer

1/2" Pipe Nipple (Not Supplied)

NOTE: U-FSUP SUPPLY LINES CAN

BE CUT TO CORRECT HEIGHT.

MAKE SURE TO CUT FROM

BOTTOM OF TUBE.

Large

end

Small

end