Dimensions Guide

•
•
Replacement parts available
Warranty
Technical Information
2 of 2
1-888-560-5222
www.giagni.com
548 South Columbus Avenue
Mount Vernon, New York 10550
Limited lifetime function and finish warranty to the original consumer purchaser covering defects in material and workmanship.
5 Year limited warranty for all industrial and commercial applications. See complete warranty statement for details
Finished Wall
•
Installation Notes
Mounting location depends on tub design and
location. Be sure to identify tub height when
determining location
Refer to Figure 1 below for roughing-in detail
•
There must be a minimum of 2” gap between top
of tub rim and bottom of the faucet spout to comply
with plumbing codes
•
Handle Styles
Cross Handle
Metal Lever Handle
2.75”
.75”
1.75”
3”
1.25”
8“
10.8“
1.1“
.5
1“
11”
6.4”
7.7”
11.2”
6“
1.14”
•
•
Toll-free helpline: 888-560-5222
Flow Rate of tub filler:
9.3 PGM @ 45 psi
Flow rate of handshower:
2.5 GPM @ 45 max
o
o
o
1.25”
59” Handshower Hose Length
•
2.25”
All measurements are approximations and should be used for reference only. Giagni reserves the right to make specification and pricing changes
without notice or obligation, and to change or discontinue models and finishes. All rights reserved. Giagni 2008
©
Components:
C-FB1-PC (Faucet Body)
C-WLBO-PC (Wall Elbows)
Contemporary Wall Mount Tub Filler
Model: CWTF-PC
Finished Wall
Rough-in
flush to
finished
wall
Decorative
Flange
Figure 1
Pipe Nipple