Installation Guide

for more information call
888.560.5222 FAX [phone] Monday - Sunday 8:00am to 6:00pm EST
IMPORTANT CLEANING NOTICE
To maintain your accessories use
only mild soap and water
Never use acids, harsh abrasives or detergents.
TOWEL BAR POST (AA01)
TOWEL BAR (AA02)
ESCUTCHEON RING (AA06)
SHEET METAL SCREWS
(AA08)
PLASTICS ANCHORS
(AA10)
ALLEN WRENCH (AA04)
MOUNTING STUD
(AA07)
SET SCREW (AA03)
ESCUTCHEON
(AA05)
HEIGHT ADJUSTMENT NUT
(AA09)
MOUNTING PLATE (AA11)
“O” RING (AA13)
ACC1
WALL
C to C
METI CotC
RABLEWOT"81 "81
RABLEWOT"42 "42
RABLEWOT"03 "03
REDLOHREPAP "6
,GNIRLEWOT
,KOOHEBOR
,HSIDPAOS
SSALG PUC
ENOYLNO
TEKCARB
DERIUQER
MOUNTING BRACKET
(AA12)
Please leave this sheet and warranty for the customer for future reference
Step 1- Secure mounting brackets(AA12) to wall using sheet metal
screws(AA08) and plastic anchors(AA10) supplied, or use
toggle bolts (not supplied) for hollow walls. Measure
center to center distance for towel bars and paper holder
before mounting to wall making sure brackets are level.
Towel bars can also be cut if shorter lengths are needed.
Step 2- Adjust height of mounting stud(AA07) to fit
escutcheon(AA05) being used and tighten height
adjustment nut(AA09).
Step 3- Place escutcheon(AA05) and escutcheon ring(AA06)
(if applicable) over mounting brackets(AA12). Place
both towel bar posts(AA01) (loosen set screws(AA03) if
necessary) on towel bar(AA02) and place over mounting
stud(AA07) tight against escutcheon(AA05).
Step 4- Tighten set screws(AA03) with supplied allen
wrench(AA04) in both towel bar posts(AA01).
Note- Paper holder, towel ring, robe hook, soap dish and glass cup
and holder mount in the same way.
Installation Instructions for Accessories for Series: A, B, C, F
ACC1 (4/30/03) ©GIAGNI COLLECTION 2004
ACC1