How to Guide

!
Technical Data Sheet
9500
PRODUCT DATA
KreteTek Industries Inc. 66 River Road Hudson, NH 03051 // 855-573-8383 // www.ghostshield.com
TEST METHOD
ASTM WK 24567!
Standard test method for soluble silicate densifiers ,
chemical hardening treatments, and waterproofing
treatments for hardened concrete.
ASTM C 39 Standard test method for compressive strength
of cylindrical concrete specimens
ASTM E 303!
Standard test method for measuring surface friction (BPT).
ASTM D 6490!
Standard test method for water vapor transmission or non
film forming agents
ASTM E 514!
Standard test method for water penetration and leakage
through masonry
ASTM D 6532!
Standard test method for evaluation of clear water repellents
on water absorption in concrete
ASTM C642
Standard test method for density, absorption and voids in
hardened concrete
ASTM C 779
Standard test method for abrasion resistance of horizontal
concrete surfaces
ASTM C 779
Standard test method for abrasion resistance of horizontal
concrete surfaces
TYPE
Density of substrate and water repellency !
Compression test, 3000 psi!
Untreated
Treated
Skid Resistance Troweled Concrete!
Untreated
Treated
Water Vapor Transmission !
WVT (grains/h/ft²)
Permeance (perms)
Water Penetration of Masonry,% Reduction
Dampness
Leakage!
Water Exclusion, %!
Concrete
Brick
Water Absorption, %
48 hours
50 days!
Abrasion Resistance, depth of wear, in (mm) 30 minutes!
untreated concrete
Lithi-Tek® 9500 treated
Abrasion Resistance, depth of wear, in (mm) 60 minutes
untreated concrete
Lithi-Tek® 9500 treated
RESULTS
Pass in
3150 psi
4250 psi
90
90
1.4
3.4
100
100
79
88
0.27
.56
0.0264 (0.7)
0.0025 (0.06)
0.0428 (1.1)
0.0106 (0.27)
Test results are averages obtained in a controlled environment, material and curing conditions of 75°F and 50%
relative humidity. Reasonable variations should be expected .
TESTING DATA
3
Sections
07 19 16
Water Repellents
07
03 35 00
Concrete Finishing
03