SDS

Methods and Material for Containment and Cleaning Up: Dike and contain spill with inert absorbent materials. Soak up with inert
material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.
SECTION 7: HANDLING AND STORAGE
Precautions for Safe Handling: Avoid contact with skin and eyes. Avoid inhalation of vapor or mist.
Conditions for Safe Storage Including Any Incompatibilities: Keep at a temperature not exceeding 100ºF. Do not allow material to freeze.
Keep container tightly closed in a dry and well ventilated place. Containers which are opened must be carefully resealed and kept
upright to prevent leakage.
Safe Storafe: No additional data
Incompatibilities: None known.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Component Exposure limit: None available
Appropriate Engineering Controls: Local ventilation: recommended, General ventilation: recommended.
Individual Protection Measures, such as Personal Protective Equipment:
Eye/Face Protection: Use proper protection ‒ safety glasses as a minimum.
Skin and body protection: Wash at mealtime and end of shift. Skin contact must be avoided by using impervious protective clothing
(gloves, aprons, boots etc.) Use chemical protective gloves as a minimum and wash skin promptly upon any skin contact.
Respiration Protection: Use respiratory protection unless adequate local exhaust ventilation is provided or
exposure assessment demonstrates that exposures are within recommended exposure guidelines. Where concentrations are above
recommended limits or are unknown, appropriate respiratory protection should be worn. Follow OSHA respirator regulations (29 CFR
1910.134) and use NIOSH/MSHA approved respirators.
Note: Trace amounts of monomers may be released during use of this material. Use adequate ventilation to keep
vapour concentrations below applicable standard.
General Hygiene Considerations: Handle in accordance with good industrial hygiene and safety practice. Wash
hands before & after breaks and work day.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Physical state / form ................................................: liquid
Color .....................................................................: Milky white (dries clear)
Odor ......................................................................: Mild, slight ammonia
Odor threshold: no data
Property:
Vapor pressure: not available
Vapor density: not available
Relative density: not available
pH: 8-9
Melting/Freezing point: Freezing Point: 32ºF
Solubility: Miscible in water
Evaporation rate: not available
Flash point: Not relevant
Flammability limits: Not relevant
Flammability (Solid, gas): Not relevant
Auto Ignition Temperature: not available
Initial boiling point/boiling range: Boiling point 212ºF
Decomposition Temperature: not available
Viscosity: not available
Specific Gravity: 1.02 +/- 0.01
Density: 8.51 lb/gal +/- 0.1