TDS
Technical Data Sheet
3500
PRODUCT DATA
APPLICATION
KreteTek Industries Inc. 66 River Road Hudson NH 03051 // 855-573-8383 // www.ghostshield.com
Precautions/Safety
Avoid contact with skin, eyes and clothing, do not take internally. Use
appropriate safety equipment during application and handling.
Please refer to the safety data sheet (SDS) for additional
precautionary instructions before use.
Best Performance (application notes)
• Proper"application is the responsibility of the user.
• Do not use on extremely porous concrete or masonry such as
CMU block.
• Do not over apply. Sealer is highly reactive. Excess
material may result in a white residue or discoloration on
the surface.!
• Does not protect against equipment leaks such as oils and
hydraulic fluids.
• Make sure the most current versions of product data sheets
and SDS are being used."
Coverage
Sila-Tek™ 3500 is concentrated. 1 coat: Up to 1000 square
feet."Variations in texture and porosity of substrate may affect the
coverage and performance of the product.
KreteTek Industries Inc. !
66 River Road
Hudson, NH 03051
www.Ghostshield.com!
Customer Service and Technical Support!
1-855-KreteTek (1-855-573-8383)
Warranty
KreteTek Industries Inc. warrants our products are manufactured to strict quality
assurance specifications and that the information supplied by us is accurate to the
best of our knowledge. Such information supplied about our products is not a
representation or a warranty. It is supplied on the condition that you shall make
your own tests to determine the suitability of our product for your particular
purpose. Any use or application other than recommenced herein is the sole
responsibility of the user. Listed physical properties are typical and should not be
construed as specifications. No warranty is made, expressed or implied, regarding
such other information, the data on which it is based or the results you will obtain
from its use. We shall have no liability for incidental or consequential damages,
direct or indirect. No representative is authorized to make any representation or
warranty or assume any other liability on our behalf with any sale of our products.
Acceptance of delivery of our product means that you have accepted the terms of
this warranty whether or not purchase orders or other documents state terms that
vary from this warranty. No representative is authorized to make any
representation or warranty or assume any other liability on our behalf with any
sales of our products. Our products contain chemicals that may cause serious
physical injury. Before using, read the Safety Data Sheet and follow the precautions
to prevent bodily harm.
Purchaser must determine the suitability of the products for the intended use and
assumes all risks and liabilities in connection therewith. This information and all
further technical advise are based on KreteTek Industries Inc. present knowledge
and experience. However, KreteTek Industries Inc. assumes no liability for
providing such information and advice including the extent to which such
information and advice may relate to existing third party intellectual property
rights, especially patent rights, nor shall any legal relationship be created by or
arise from the provision of such information and advice. KreteTek Industries Inc.
reserves the right to make any changes according to technological progress or
further developments. The Purchaser of the Product(s) must test the product(s) for
suitability for the intended application and purpose before proceeding with a full
application of the product(s). Performance of the product described herein should
be verified by testing and carried out by qualified experts.
For professional use only.!
Last revised 4/18
4
Sections
03
03 35 00
Concrete Finishing / Densifier & Hardener