SDS
CAS: 10213-79-3: Disodium Metasilicate Pentahydrate
CAS: 64-02-8: tetrasodium ethylenediaminetetraacetate
For listed ingredients, the identity and exact percentages are being withheld as a trade secret.
SECTION 4: FIRST AID MEASURES
General Information: Immediately remove any clothing soiled by the product.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Immediately rinse with water. If skin irritation continues, consult a doctor.
After eye contact: Protect unharmed eye. Remove contact lenses if worn. Rinse opened eye for several minutes under running water. If
symptoms persist, consult a doctor.
After swallowing: Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.
Most important symptoms and effects, both acute and delayed: Irritating to eyes and skin. Cramp, Gastric or intestinal disorders when
ingested. Nausea in case of ingestion.
Hazards: No further relevant information available.
SECTION 5: FIRE-FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media: Use fire extinguishing methods suitable to surrounding conditions.
For safety reasons unsuitable extinguishing agents: None.
Special hazards arising from the substance or mixture: Formation of toxic gases is possible during heating or in case of fire.
Advice for firefighters:
Protective equipment: Wear self-contained respiratory protective device. Wear fully protective suit.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures: Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation. For large spills, use respiratory protective device against the effects of fumes/dust/aerosol.
Environmental precautions: Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage
system.
Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal
binders, sawdust). Dispose contaminated material as waste. Send for recovery or disposal in suitable receptacles. Clean the affected
area carefully; suitable cleaners are: warm water.
SECTION 7: HANDLING AND STORAGE
Precautions for safe handling: Prevent formation of aerosols. Use only in well ventilated areas. Avoid splashes or spray in enclosed
areas. Avoid splashes or spray in enclosed areas.
Information about fire – and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: Store only in the original receptacle. Unsuitable material for receptacle:
aluminum.
Information about storage in one common storage facility: Store away from foodstuffs. Do not store together with oxidizing and acidic
materials. Store away from metals.
Further information about storage conditions: Store in cool, dry conditions in well-sealed receptacles. Keep container tightly sealed.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters:
Ingredients with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials
with critical values that have to be monitored at the workplace.
Exposure controls:
Personal protective equipment: General protective and hygienic measures: The usual precautionary measures are to be adhered to when
handling chemicals. Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Do not
inhale gases/fumes/aerosols. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
Respiratory protection: Not required under normal conditions of use. For large spills, respiratory protection may be advisable. Use
suitable respiratory protective device when aerosol or mist is formed.