Instructions / Assembly

47
BATTERY BOX
©Ghost Controls 2017 | www.GhostControls.com
BATTERY BOX SHOULD BE MOUNTED NEXT TO OR BELOW CONTROL BOX SO THAT POWER
HARNESS CAN CONNECT INTO MAIN SYSTEM CONTROL BOARD THROUGH THE STRAIN RELIEF.
GHOST CONTROLS
®
does not recommend splicing the battery harness wire to extend its length. Battery Box should
be mounted at least three feet above ground to avoid any standing water or snow and to prevent damage from landscaping
equipment such as string trimmers or lawn mowers.
The included mounting screws are designed to be installed into wood or metal posts. If you are installing onto a post or column
made of material other than wood or metal, you must replace the screws (not included) with appropriate mounting screws.
INSTALLING YOUR BATTERY BOX:
STEP 1. PLAN YOUR INSTALLATION LOCATION
Battery Box Kit must be located within 4 feet of control box and mounted to a solid object such as the fence.
STEP 2. MOUNT BOX WITH MOUNTING SCREWS
A. Pre-drill (4) holes (7/32” drill bit) in backside of battery box, and
thru the fencing where you will be securing the battery box to.
B. Now use the (4) supplied phillips screws to mount the control
box to the fence.
CONTROL BOX BATTERY BOX
INSTALLING BATTERY BOX
INSTRUCTIONS