Manualshelf

Instructions / Assembly

ManualsBrandsGHOST CONTROLS ManualsAutomatic Gate OpenersArchitectural Series Solar Single Automatic Gate Opener Kit
41424344454647484950
43
CONTROL BOX
©Ghost Controls 2017 | www.GhostControls.com
NOTE
Mount the control box a minimum of 3 feet above the ground to keep dirt and water from damaging the control board
and within 4 feet of the operator arm in order for the operator cable to reach the control box.
STEP 1. INSTALLING THE CONTROL BOX
A. Pre-drill (4) holes (7/32” drill bit) in backside of control box, and thru the fencing where you will be securing
the control box to.
B. Now use the (4) supplied phillips screws to mount the control box to the fence.
STEP 2. MAKE SURE THE ON/OFF SWITCH ON BOTTOM OF CONTROL BOX IS IN THE
OFF POSITION
INSTALLING CONTROL BOX
INSTRUCTIONS