Manualshelf

Instructions / Assembly

ManualsBrandsGHOST CONTROLS ManualsAutomatic Gate OpenersArchitectural Series Solar Single Automatic Gate Opener Kit
31323334353637383940
33
PUSH-TO-OPEN
Ghost Controls 2017 | www.GhostControls.com
STEP 4. CLAMPING POST BRACKET TO POST.
After the post bracket is pre-assembled and the horizontal centerline has been marked on the post as referred to in Step
2 and 3, then proceed to clamp the post bracket to the marked centerline on the post.
NOTE
It is recommended for many Push-To -Open applications to not center the bracket. Position the edge of the
bracket along the edge of the post (closest to the gate) and check the clearances in Step 5.
Some Pull-To-Open applications may require the bracket to be positioned along the edge of post furthest from the
gate to obtain clearances that will be checked in Step 5.