Instructions / Assembly

25
PULL-TO-OPEN
Ghost Controls 2017 | www.GhostControls.com
STEP 9. ASSEMBLE FRONT MOUNT GATE BRACKET.
NOTE
Your gate should now be in the FULLY OPEN position.
A. Temporarily assemble the front mount of the gate by inserting the supplied 10mm x 40mm
clevis pin, 10mm I.D. nylon spacer, and clevis hairpin thru the gate bracket to secure the front
of the operator to the pre-assembled gate bracket which you assembled in Step A above.
NOTE
ALTERNATE TUBE GATE BRACKETS FOR MOUNTING TUBULAR GATES. (NOT FOR USE WITH FLAT
PANEL GATES) see below image. Tube brackets (AXTB) sold separately.