Instructions / Assembly

10
SYSTEM SAFETY
©Ghost Controls 2017 | www.GhostControls.com
12. The included warning signs must be attached to
each side of the gate to alert the public of the auto-
matic gate operator system. Please contact GHOST
CONTROLS
®
Technical Support for replacement
signs if yours become damaged.
13. While the gate is moving do not drive into the gate
area to prevent entrapment and potential damage to
your vehicle, gate, AND the gate opener system.
14. Do not attempt to “race the gate” by driving through
the gate while it is opening or closing. This is extremely
dangerous and can cause damage to your vehicle,
gate, AND the gate opener system.
15. Maintain the gate and the gate opener system to
make sure that the gate continues to swing freely
and is level throughout the entire swing path. The gate
hinges should be lubricated regularly, the condition
of the battery checked every few months, and all
connections checked no less than an annual basis.
16. In the event that you sell the gate opener system
or your property with a system installed, please
provide these instructions to the new owners.
The most recent version of these instructions
can be found on our support website at
https://ghostcontrols.support.com.
VEHICULAR GATE STANDARD
We recommend that all vehicular gates be constructed
and installed in accordance with Active Standard ASTM
F2200, Standard Specification for Automated Vehicular
Gate Construction. For more information on this stan-
dard, contact ASTM directly at
http://www.astm.org/Standards/F2200.htm.
WARNING SIGNS
The included warning signs must be installed on both
the inside and outside of the gate.
! !
©
GHOST CONTROLS 2016
1. Persons are to keep clear! The gate is able
to be moved without prior warning.
2. DO NOT let children operate the gare or
play in the gate area.
3. Persons are to operate the gate only when
the gate area is in sight and free of people
and obstructions.
4. Persons are to read the user’s manual and
safety instructions.
WARNING