Instructions / Assembly

BEFORE YOU BEGIN:

■ A Ghost Controls ABBT Battery Box Kit is required to power the operator and is included with one 12v battery, if your

using solar you will need to add another 12v battery to that box.

■ Push-To-Open applications (gate that swings away from the property) will require the Ghost Controls push-to-open

bracket kit (AXPO).

■ If charging your system with the AC transformer, you will need to purchase a 16 gauge stranded, 2-conductor low voltage

wire to connect the transformer to the gate operator control board. Up to 1,000 ft. of wire can be used.

■ For installations farther than 1,000 ft. from an AC power source, the Ghost Controls 10 Watt Solar Panel Kit (AXDP)

can be used to charge the battery. Up to 30 Watts of solar power can be used.

CUSTOMIZING YOUR GATE:

Information on additional accessories shown below can be found on the accessory page 70 or visit

www.ghostcontrols.com

INCLUDED IN DTP1 AND DEP2 KITS

ADDITIONAL ACCESSORIES

12V battery required and included

Opens gates up to 20 ft. or 1,000 lbs.

per gate leaf

Low Voltage Wire

(AXLV)

Wireless

Keypad (AXWK)

used for exit

of property

Safety Placards

DTP1 or DEP2

Operator Arm

5 Button

Transmitter

(AXP1)

3 Button

Transmitter

(AXS1)

Water Resistant

Transmitter

(AXR1)

DTP1 SINGLE KIT