Full Product Manual

67
MANUAL
©Ghost Controls
®
2023
UNIVERSAL TUBE GATE BRACKET KIT  AXTB
Mounting bracket kits that will attach a variety of devices to 1-1/2’-2” tubes including tubular gates. These
include gate opener kits, ZombieLock
®
, or any other device that needs to be attached to tubes.
WIRED VEHICLE SENSOR  AXXV
The GHOST CONTROLS
®
Vehicle Sensor is the easiest way to trigger your gate to open when a vehicle
is trying to exit your property. This sensor is buried beneath the ground surface next to your driveway and
connects into your gate controller box. 55’ cable included (cannot be spliced)
WIRELESS VEHICLE SENSOR  AXWV
The GHOST CONTROLS
®
Vehicle Sensor is the easiest way to trigger your gate to open when a vehicle is
trying to exit your property. This sensor is easy to install and sensor is buried beneath the ground surface next
to your driveway and takes 2 C batteries. Does not connect into the control box.
PUSH BUTTON  AXPB
The standard push button will control a single or dual gate system up to 1,000’ ft away with low voltage wire.
LOCKING CLEVIS PIN  AXLC
The GHOST CONTROLS
®
Locking Clevis Pin allows you to easily secure the mounting brackets and rear
mount of the gate operator to the post with a padlock. The locking clevis pin replaces the clevis pin that is
included in the gate opener kit.
100' WIRE  AXLV
100' of 16 AWG low voltage, direct burial, standard wire for wiring the transformer or running the power cable
from solar panel.
PHOTO EYES  AXPS OR AXPE
Adjustable photo eyes for your outdoor environment. We oer monitored and non-monitored versions.
PUSHTOOPEN GATE BRACKET KIT  AXPO
The Push-To-Open Bracket is required for any gate opener system that is installed when the installation causes
the gates to swing out from the property. Most gates are installed with the swing action into the property and do
not require these brackets. Dual gates will need (2) AXPO kits.
GHOST MULTI CONNECT
TM
 AXMCR
Installing the Ghost Multi Connect
TM
Kit to your Ghost Control Board can allow you to access and control your
automatic gate from your phone. Once the Ghost Multi Connect
TM
Kit is installed you will need to download our
customized app (free on apple and google store) to your phone, Ipad, or tablet using wifi at your gate. Don’t have
internet or wifi at the gate? You can utilize the bluetooth feature. The Ghost Multi Connect
TM
Kit also works in
parallel with your tradtional remote transmitter. For more nformation please see this link https://ghostcontrols.
com/pages/ghost-multi-connect-smart-automatic-gate-opener-solutions
* You may need an upgraded board depending on which control board your system has.