Full Product Manual

65
MANUAL
©Ghost Controls
®
2023
The gate can be opened or closed manually by releasing the front mount from the gate.
You must disconnect the operator only after the operator power switch is OFF and the gate is NOT moving. If you have the
accessory ZombieLock
®
installed, this lock should be manually disengaged with the key because removing power does not
unlock this lock.
1. Make sure to turn your control box to the o position. The gate operator is battery powered so unplugging the
AC transformer does not turn the power to the operator o.
2. Remove the hairpin clip and clevis pin from the FRONT mount of the gate operator.
3. Swing the operator out of the way of the gate.
4. Swing the gate to the fully open position and temporarily secure it to prevent the gate from freely swinging.
MANUAL GATE OPERATION
EVERY USER MUST KNOW THESE STEPS