Manualshelf

Full Product Manual

ManualsBrandsGHOST CONTROLS ManualsAutomatic Gate OpenersD Series Single Smart Ready Automatic Gate Opener Kit with Tube Gate Brackets
21222324252627282930
27
PULLTOOPEN
*Your Ghost Opener Arm might look different than illustrations through out this manual
STEP 14A. FOR ROUND TUBE GATES ONLY Temporarily attach the front mount bracket to
the operator. The gate must remain in the desired open position.
OPEN THE GATE TO THE DESIRED OPEN POSITION
A. Attach the gate bracket assembly to the fully retracted operator as shown. Insert the supplied 10mm x 40
mm clevis pin, 10mm I.D Nylon Spacer, and clevis hairpin through the front of the operator and gate bracket
to secure the bracket onto the front mount of the gate operator.
WARNING
DO NOT SCREW THE OPERATOR ARM IN OR OUT TO ADJUST YOUR GATE POSITION. DOING SO
CAUSES THE SYSTEM TO NOT FUNCTION PROPERLY.