Manualshelf

Full Product Manual

ManualsBrandsGHOST CONTROLS ManualsAutomatic Gate OpenersD Series Single Smart Ready Automatic Gate Opener Kit with Tube Gate Brackets
21222324252627282930
25
PULLTOOPEN
©Ghost Controls
®
2023
*Your Ghost Opener Arm might look different than illustrations through out this manual
TURN CONTROL BOX ON. YOU SHOULD HEAR A SERIES OF BEEPS AS THE SYSTEM
IS TURNED ON
STEP 11. Locate the jog buttons at the top right of control box to test the arm and connections.
Press the jog close button to extend the arm 3-4 inches out.
STEP 12. Use the remote transmitter that came in your kit and press first button to fully retract
the arm. The arm will stop on its own.
The arm in the fully retracted position will determine the OPEN position of the gate.
NOTE
The arm has an internal limit switch that is fixed and is not adjustable.
ARM FULLY
RETRACTED
USE THIS
BUTTON
ARM EXTENDED
OUT 3-4 INCHES
USE FOR FIRST ARM
INSTALLATION
DUAL ONLY: USE
FOR SECOND ARM
INSTALLATION