Instructions / Assembly

ACCESSORIES

©Ghost Controls 2017 | www.GhostControls.com

NOTE

Please refer to manufacturers manual or website for more detailed instructions on how to connect and use accessories

with your gate operator.

PREPARING CONTROL BOX FOR ACCESSORY WIRING

MAKE SURE THE POWER IS TURNED OFF WHICH IS LOCATED ON THE BOTTOM OF THE CONTROL BOX BEFORE

WIRING.

CONNECTING GHOST CONTROLS ZOMBIE GATE LOCK (AXZL)

NOTE

Please refer to manufacturers manual or website for more detailed instructions on how to connect and use accessories

with your gate operator.

■ ONLY ACCEPTS patented GHOST CONTROLS

AXZL Zombie Gate Lock with

feedback system.

■ Controller will automatically detect lock present and respond accordingly.

■ Lock (if present) will be pulled (unlocked) for the ﬁrst few seconds while opening. If lock

is not completely pulled the gate will not open to prevent damaging to the gate and lock.

■ Lock will also be pulled (unlocked) near the closed limit position as it is closing

to ensure a smooth and "soft" operation.

CONNECTING HARDWIRED DEVICES

NOTE

Please refer to manufacturers manual or website for more detailed instructions on how to connect and use accessories

with your gate operator.

Accepts “

DRY CONTACT” input signals as control input. DRY CONTACT is passive (no power) such as a simple push button

that switches from short circuit to open circuit.

CLOSE-UP VIEW

OF BOTTOM OF

CONTROL BOX

CONNECTING OPTIONAL

ACCESSORIES

CONNECTING TO CONTROL BOARD