Manualshelf

Instructions / Assembly

ManualsBrandsGHOST CONTROLS ManualsAutomatic Gate OpenersArchitectural Series Dual Automatic Gate Opener Kit
21222324252627282930
27
PULL-TO-OPEN
Ghost Controls 2017 | www.GhostControls.com
STEP 8. HANGING OPERATOR ON REAR MOUNT.
Insert clevis pin, nylon spacer and clevis hairpin as shown below to secure the rear of the operator to the post.
STEP 9. ASSEMBLE FRONT MOUNT USING ESTATE BRACKET ON DECORATIVE GATE.
NOTE
Your gate should now be in the FULLY OPEN position.
A. Temporarily assemble the front mount gate bracket to the operator by inserting the supplied 10mm x
40mm clevis pin, 10mm I.D. nylon spacer, and clevis hairpin thru the gate bracket to temporarily
secure the front of the operator.