Full Product Manual

STEP 3: VERIFY THE RECEIVER PIN LINES UP WITH SLOT IN THE LOCK
The gate lock needs to be level with the receiver.
STEP 4: DRILL HOLES ON THE POST AND ATTACH RECEIVER WITH INCLUDED NUTS AND BOLTS
See illustrations in STEP 2.
STEP 5: GATE LOCK CAN NOW BE PERMANENTLY MOUNTED WITH THE INCLUDED NUTS AND BOLTS TO
THE GATE CROSSMEMBER OR GATE SURFACE.
Drill the holes through the gate to attach bolts, nuts, and washers. Tighten lock securely.
CONNECTING LOCK TO THE CONTROL BOX
STEP 1: TURN ON/OFF SWITCH AT CONTROL BOX TO OFF
CLOSE-UP VIEW
OF BOTTOM OF
CONTROL BOX
View looking down showing receiver pin
lines up with gate lock
RECEIVER
AND PIN
LOCK
OFF
LOCK
KEYS
Mounting on
DUAL
tube gates
OPTIONAL AXTB
TUBE BRACKETS
RECEIVER
AND PIN