Instructions / Assembly

VEHICLE SENSOR WITH 55’ CABLE

OVERVIEW

Wired Vehicle Sensor

Minimum of 20 Feet

WHITE (Output: Normally Open) Wire connects to OPEN on Hardwired Input

GREEN (Output: Common) Wire connects to COM on Hardwired Input

BARE (Shield) Wire connects to COM on Hardwired Input

BLACK (Power In -) Wire connects to COM on Hardwired Input

RED (Power In +) Wire connects to + on Lock

WHITE

GREEN

BARE

BLACK

RED

WHITE

GREEN

BARE

BLACK

RED

PAGE 1
VEHICLE SENSOR WITH 55’ CABLE OVERVIEW WHITE GREEN BARE BLACK RED WHITE GREEN BARE BLACK RED WHITE (Output: Normally Open) Wire connects to OPEN on Hardwired Input GREEN (Output: Common) Wire connects to COM on Hardwired Input BARE (Shield) Wire connects to COM on Hardwired Input BLACK (Power In -) Wire connects to COM on Hardwired Input RED (Power In +) Wire connects to + on Lock Minimum of 20 Feet Wired Vehicle Sensor
PAGE 2
VEHICLE SENSOR WITH 55’ CABLE OVERVIEW NOTE PLEASE READ THE MANUFACTURERS INSTRUCTIONS INCLUDED WITH THIS ITEM PRIOR TO INSTALLING. TIPS FOR INSTALLATION: All wires should be enclosed within PVC conduit above and below ground to provide an additional level of protection from the environment. Do not enclose the sensor wand itself within conduit. Ghost Controls does not recommend splicing the sensor wire to extend its length.