Instructions / Assembly
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
PROGRAMMING ADDITIONAL GATE ACCESS PINS
ADDING A GATE ACCESS PIN: USING YOUR NEW MASTER PIN XXXX:
Press program button, master pin, program button, 2 2, program button, 4 digit access pin, program button | SUCCESS = hearing 3 beeps, pause, 2 beeps
ADDING A TEMPORARY PIN THIS TIME BASED PIN WILL NOT WORK AFTER “DD” DAYS:
Press program button, master pin, program button, 2 3, program button, 4 digit temporary pin, program button, dd = number of days of access to property, program button |
SUCCESS= hearing 3 beeps, pause, 2 beeps
ADDING A “USE” BASED TEMPORARY PIN THIS USE BASED PIN WILL NOT WORK AFTER “UU” USES:
Press program button, master pin, program button, 2 8, program button, 4 digit temporary pin, program button, uu = number of uses for access and program button |
SUCCESS = hearing 3 beeps, pause, 2 beeps
DELETE AN ACCESS PIN YOU CAN NO LONGER USE THIS PIN TO OPERATE GATE:
Press program button, master pin, program button, 3 2, program button, 4 digit access pin to delete, program button | SUCCESS = hearing 3 beeps, pause, 2 beeps
REPLACE MASTER PIN DO NOT GIVE OUT YOUR MASTER PIN TO ALLOW ACCESS:
Press program button, master pin, program button, 7 6, program button, 4 digit new master pin and program button | SUCCESS = hearing 3 beeps, pause, 2 beeps
ACTIVATE/DEACTIVATE SPECIAL FEATURES (CAN ONLY USE WITH MASTER PIN)
PARTYMODE
®
(keeps gate open to allow access to property for a set time) when you want to enable PartyMode
®
keep gate in open position and
suspend gate’s auto-close feature (if enabled), the gate opener will beep twice if there is an attempt to close the gate. This is to indicate that PartyMode
®
is
enabled, therefore gate cannot be closed. Follow steps:
Press button, master pin and send | ACTIVATE SUCCESS = hearing 2 beeps from gate alarm | DEACTIVATE SUCCESS = hearing 3 beeps from gate alarm
PARTYMODE SECURE
®
AND 1KEY
®
(use any number button and send button to operate gate to allow access) when you want to enable PartyMode Secure
®
or 1key
®
, any number button and the send button will operate the gate without the need to enter an access pin. The button’s green led will stay on when any button
is pressed to indicate the keypad is in 1key
®
or PartyMode Secure
®
. Follow steps:
Press
button, master pin and send | ACTIVATE SUCCESS = stays lit for 30 sec. | DEACTIVATE SUCCESS = light goes out
VACATIONMODE
®
(keeps gate closed no access to property) when you want to enable VacationMode
®
to keep gate in closed position (gate has to be
closed to set). Gate will beep twice if there is an attempt to open the gate. This is to indicate that VacationMode
®
is enabled and the gate can not be opened.
Follow steps:
Press button, master pin and send | ACTIVATE SUCCESS = hearing 2 beeps from gate alarm DEACTIVATE SUCCESS = hearing 3 beeps from gate alarm
RESTORING YOUR KEYPAD BACK TO FACTORY DEFAULT
1) Remove one of the “C” batteries from the back of the keypad for 15 seconds
2) Reinstall the “C” battery and immediately press and release the program button 3 times
3) If successful, keypad will beep 3 long beeps followed by 2 short beeps
4) If unsuccessful, repeat the above steps
WARNING
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
www.GhostControls.com
AXWKIM Made in China, Rev. 2018-08
©2018 GHOST CONTROLS