Product manual

Manual Configuring monitor functions |49
Screenshot 45 - TCP/IP check parameters dialog
A TCP/IP check requires the following parameters:
» Port – Specify the TCP port number of the protocol to be checked, by default port 80.
» Send command when connected – Enable this flag to send the specified command as soon
as the connection is established.
» Response must include the following string – Enable this flag in order to check if the
response message contains the specified string.
» Timeout – Number of milliseconds before the function will timeout. Usually, a connection
to the server will be established within 1 second. However, some slow/busy servers need
more time. Recommended value is 7000 milliseconds.