Product manual

Manual Global alerting options |121
Screenshot 114 - Dial & Modem properties tab
5. Click on the „Dial and Modem Properties‟ tab and specify the following parameters:
» Tone/Pulse – Select the type of dialing that your modem will use (i.e., tone or pulse).
» Dial prefix – Specify any additional numbers that need to be dialed before the dial-string.
The dial-string is the number of the selected provider and can only be modified by
editing the SMSC provider‟s details. For further information, please refer to the
„Changing SMSC providers details‟ section in this chapter.
» COM Port - Select the com port where the modem is connected.
» Flow Control – (Leave as default).
» Initialization String - If required, specify any AT Commands that you wish to send to your
modem.
The initialization string is a set of modem AT commands combined into one string (e.g.,
AT &F &C1 &D2). For a complete list of AT commands visit
http://esvc001164.wic013u.server-web.com/modems/modemstrings.htm
6. Click on „OK‟ to close the configuration dialog.
7. In the „Retries‟ entry box, specify the number of redial attempts required before the
connection is timed out.
8. Click on „OK‟ to save your configuration settings.
Add new SMSC providers
GFI Network Server Monitor includes an extensive list of SMS service providers. However, it
maybe necessary to add new providers from time to time. To add a new provider: