manual

GFI Network Server Monitor Configuring GFI Network Server Monitor • 36
Screenshot 32 - Maintenance schedule Dialog
To set up maintenance schedules:
1. Right click on the check to be configured and select ‘Properties’. By
default the check properties dialog will open in the ‘General’ tab.
2. Click on the ‘Maintenance’ Tab. If the ‘Inherit maintenance times
parameters from Parent folder’ option is selected, unselect it and
specify the operational/maintenance periods for the target computer
being monitored.
e.g., The screenshot above shows the maintenance schedule setup
for a target computer which is down between 21:00 and 23:00 hrs all
week for data backups and between 8:00 and 12:00 hrs every
Saturday for hardware and software maintenance.
NOTE: Marked (
) time intervals indicate operational times, during
which the monitoring check can be run.
3. Click on ‘Apply’ to accept the current configuration.
TIP 1: To mark/unmark a whole day, click on the name of the day
(e.g., Monday) at the left of the hours grid on display.
TIP 2: To mark the same hour for a whole week, click on
at the top
of the column representing the required hour.
Inheriting check properties
About property inheritance
In GFI Network Server Monitor, a parent folder is a folder which
contains monitoring checks. Parent folders have properties identical to