manual

GFI Network Server Monitor Users and Groups • 149
Users and Groups
Introduction
GFI Network Server Monitor checks refer to the user's properties to
gain alert details (e.g., email address), rather than directly to an email
or a number. This is in order to avoid having to change all the checks
if a particular email or number of a user changes. You can configure
user name, email address, mobile number, pager number and the
computer name(s) from where network messages should be sent,
from the user properties.
You can also define the working hours of a user and decide what alert
(if any) is to be sent depending on the time that the important event
occurred i.e. during or outside of working hours.
You can create a group of users to notify more than 1 person and
avoid having to specify multiple users for each check you create. This
makes it much easier to change the users to notify afterwards since
you just need to change the group membership.
Screenshot 133- Users and Groups folders
Users
Add a new user
1. Right click on the Users folder under the ‘Users and Groups’ node
and go on New > User.
2. Specify the parameters required in the user properties as described
below.