manual

GFI Network Server Monitor Global alerting options • 115
Screenshot 108 - Edit Property dialog
3. Double click on the property which you want to configure (e.g.,
Service Center Number) and specify the necessary parameters in the
Edit Property dialog.
NOTE: When configuring properties, always specify the details
supplied to you by your SMSC provider. If configuration parameters
are not available, ask your provider to supply you with the required
information.
The In-built GSM SMS Server requires the following parameters:
• Service Center Number – Specify the number of your provider’s
SMS service center (SMSC). This number is supplied by the SMS
service provider.
• COM port – Select the COM port where the GSM device (i.e.,
phone/modem) is connected.
• Baud Rate – Specify the speed at which the communication will
take place. Always specify the speed recommended by your
SMSC provider.
• Initialization String – (Optional) If required, specify any AT
Commands that you wish to send to your modem.
NOTE: The initialization string is a set of modem AT commands
combined into one string (e.g., AT &F &C1 &D2). For a complete list of
AT commands, visit http://esvc001164.wic013u.server-
web.com/modems/modemstrings.htm
4. In the ‘Retries’ entry box, specify the number of times that the In-
built GSM SMS Server will try to send an SMS alert should the first
attempt fail.
5. Click on ‘OK’ to save your configuration settings.