Installation instructions

38  Installing GFI MailSecurity GFI MailSecurity for Exchange/SMTP
10. You now need to start all the services that you stopped in step 4
above, from the Services control applet.
11. Use the GFI MailSecurity 10 configuration to check that the GFI
MailSecurity 8 settings were migrated correctly.
Upgrading from GFI MailSecurity 9 to GFI MailSecurity 10
NOTE: The upgrade process cannot be reverted. If you upgrade GFI
MailSecurity to version 10, you cannot go back to version 9 of the
product.
If you are currently using GFI MailSecurity 9, you can upgrade your
current installation. The GFI MailSecurity 9 configuration settings are
kept. You need to enter the fully purchased license key after the
upgrade completes. For information on how to obtain the new license
key, visit http://customers.gfi.com.
To upgrade:
1. Launch the GFI MailSecurity 10 setup file on the machine on which
you have installed GFI MailSecurity 9.
2. Setup will now proceed to install GFI MailSecurity 10 in exactly the
same manner as a new installation. However, it will not let you change
the destination folder.
Screenshot 31 - Upgrading from GFI MailSecurity 9 to GFI MailSecurity 10
3. To continue the installation, click Install. For a detailed description,
of the installation procedure, refer to the „Installing GFI MailSecurity‟
section earlier in this chapter.
NOTE: During an upgrade you are also asked to upgrade your
quarantine database to the new Firebird database format. For more
information, refer to the Quarantine Upgrade tool section in this
manual.