Installation instructions

GFI MailSecurity for Exchange/SMTP Installing GFI MailSecurity  37
 GFI Content Security Auto-Updater Service
 GFI MailSecurity Attendant Service
 GFI MailSecurity Scan Engine
 IIS Admin
 Simple Mail Transfer Protocol (SMTP).
5. To convert and import the GFI MailSecurity 8 settings to the GFI
MailSecurity 10 configuration database, you need to run the
msec8upg.exe tool found in the GFI MailSecurity 10 folder, for
example:
c:\program files\GFI\ContentSecurity\MailSecurity.
Screenshot 29 - GFI MailSecurity 8 configuration settings migration tool
6. Double-click the msec8upg.exe file.
7. When the tool loads, click Browse. Select the avapicfg.rdb file from
the data sub-folder under the GFI MailSecurity 8 root folder.
8. Click Migrate.
NOTE: If you click Migrate and the user lookup mode of GFI
MailSecurity 8 and GFI MailSecurity 10 do not match (for example GFI
MailSecurity 8 was installed in SMTP mode and GFI MailSecurity 10 is
installed in Active Directory mode or vice versa), an error like the one
shown below will be displayed. In such a case, you will not be able to
convert and import the settings due to user-based rules.
Screenshot 30 - User lookup mode mismatch.
9. When the migration process completes, a Configuration was
successfully converted information dialog box will be displayed.
Click OK to close the information dialog box and click the close button
to close the migration tool.