Product manual

GFI LanGuard 5 Scanning Your Network | 68
Screenshot 33: Add new rule...
6. From the Add new rule dialog, select the Rule type described below to add computers:
Rule type Description
Computer
name is
Search and add computers by name. Key–in a valid computer name and click Add for each computer.
Click OK to apply changes.
Computers
file list is
Search and add computers from a text file. Click the browse button and locate the text file. Click OK to
apply changes.
Note
When submitting a list of target computers from file, ensure that the file contains only one target
computer name per line.
Domain
name is
Search and add computers that are members of a domain. Select the domains from the list and click OK.
IP address is Search and add computers by IP address. Select This computer to add the local host or Scan another
computer to add a remote computer. Key–in the IP address if required and click OK.
IP address
range is
Search and add computers within an IP range. Select Scan an IP address range and key in the IP range or
select CIDR subnet and key–in the range using CIDR notation.
Note
The Classless Inter–Domain Routing (CIDR) provides an alternative way of specifying an IP address
range. The notation is as follows: <Base address> / <IP network prefix>. Example:
192.168.0.0/16
Organization
unit is
Search and add computers within an organizational unit. Click Select and from the list select the Organ-
izational units. Click OK.
Table 27: Custom target properties