Product manual

GFI LanGuard 13 Utilities | 225
"hh:mm:ss")] [/RebootInInterval] [/ShutDownInInterval]
[/RebootIntervalStart=Time(formatted as "hh:mm:ss")]
[/RebootIntervalEnd=Time(formatted as "hh:mm:ss")] [/?]
deploycmd command switches
Switch Description
Target Specify the name(s), IP or range of IPs of the target computer(s) on which the patch
(es) will be deployed.
/File Specify the file that you wish to deploy on the specified target(s).
/User and /Password (Optional) Specify the alternative credentials that the scanning engine will use to
authenticate to a target computer during patch deployment. Alternatively you can
use the /UseComputerProfiles switch to use the authentication credentials already
configured in the Dashboard.
/warnuser (Optional) Include this switch if you want to inform the target computer user that a
file/patch installation is in progress. Users will be informed through a message dialog
that will be shown on screen immediately before the deployment session is started.
/useraproval (Optional) Include this switch to request the user’s approval before starting the
file/patch installation process. This allows users to postpone the file/patch instal-
lation process for later (for example, until an already running process is completed on
the target computer).
/stopservice (Optional) Include this switch if you want to stop specific services on the target
computer before installing the file/patch.
Note
You cannot specify the services that will be stopped directly from the command
line tool. Services can only be added or removed through the management
console.
/customshare (Optional) Specify the target share where you wish to transfer the file before it is
installed.
/reboot (Optional Parameter) Include this switch if you want to reboot the target computer
after file/patch deployment.
/rebootuserdecides (Optional Parameter) Include this switch to allow the current target computer user to
decide when to reboot his computer (after patch installation).
/wake Wakes up offline computers.
/shutdown (Optional Parameter) Include this switch if you want to shut down the target com-
puter after the file/patch is installed.
/deletefiles (Optional Parameter) Include this switch if you want to delete the source file after it
has been successfully installed.
/timeout (Optional Parameter) Specify the deployment operation timeout. This value defines
the time that a deployment process will be allowed to run before the file/patch
installation is interrupted.
/usecomputerprofiles (Optional) Use data from computer profiles.
/RebootCountdown (Optional) Display a reboot countdown window for a number of seconds to the remote
user before rebooting.
/RebootCountdownMessage (Optional) Used in conjunction with /RebootCountdown. Displays a custom message to
the remote user before rebooting the computer.
/RebootAtFirstOccurenceOf (Optional) Reboot a computer at the first occurrence of a specified time. The time is
expected in the 24 hour format "hh:mm:s s". Example, 18:30:00.
/ShutDownAtFirstOccurenceOf (Optional) Shutdown a computer at the first occurrence of a specified time. The time
is expected in the 24 hour format "hh:mm:s s". Example, 18:30:00.
/RebootInInterval (Optional) Reboot the computer after deployment if deployment completes in the
specified time interval. Otherwise wait to specify the interval manually. Requires
parameters /RebootIntervalStart and /RebootIntervalEnd.
Table 87: deploycmd command switches