Product manual

GFI LanGuard 8 Remediate Vulnerabilities | 128
Screenshot 81: After deployment options
6. Click After Deployment tab. Configure After Deployment options described below:
Option Description
Do not reboot/shut-
down the com-
puter
Select this option to leave scan target(s) turned on after remediating vulnerabilities.
Reboot the target
computers
Reboots the computers after remediating vulnerabilities.
Shut down the tar-
get computers
Target machine will shut down after deploying software.
Immediately after
deployment
Reboots/shuts down computers immediately after remediating vulnerabilities.
At the next occur-
rence of
Specify the time when the computers reboot/shut down.
When between This option enables you to specify two time values. If the remediation job is completed between
the specified times, the computer(s) will reboot/shut down immediately. Otherwise, the
reboot/shut down operation is postponed until the next entrance into the specified time inter-
val.
Let the user
decide
Click Preview to view a screenshot of the dialog in the user manual. This dialog opens on the end-
user’s computer after remediating vulnerabilities. For more information, refer to Configuring
end-user reboot and shut down options (page 132).
Show notification
before shut down
for
Shows a custom message on the end user’s computer for a specified number of minutes before
reboot/shut down.
Table 51: After deployment