GFB Deceptor Pro II T9507 instruction manual Go Fast Bits P/L P.O. Box 1017 Riverwood NSW 2210 Australia Ph: +61 (0)2 9534 0099 Fax: +61 (0)2 9534 3999 Email: sales@gfb.com.au Web: www.gfb.com.
GFB Deceptor Pro II Thank you for purchasing the GFB Deceptor Pro II blow off valve. We highly recommend that you familiarize yourself with the operation and adjustments of the Deceptor Pro II before installing it. Included in the T9507 kit: ? Deceptor Pro II blow-off valve ? Electronic in-car volume controller ? Vacuum hose ? Double-sided mounting tape ? Wiring loom INSTALLING THE control box 1) Test the unit before installation by connecting the Deceptor Pro II's plug to the in-car controller.
INSTALLING THE VALVE Note that installing the Respons T9007 must be done from underneath the car, which requires raising the car on ramps or axle supports, or a hoist. WARNING: NEVER work under a car supported only with a jack. 1) Remove the plastic section of the under tray by popping the plastic clips and the two bolts. Note that there are more plastic clips than indicated by the arrows. Diverter valve location 2) Remove the two hoses from in front of the diverter to gain access to the clamps behind.
Adjusting the sPRING PRELOAD Contrary to popular belief, the spring pre-load DOES NOT need to be adjusted to suit different boost pressure. The Deceptor Pro II will stay shut under full throttle conditions regardless of boost pressure or spring pre-load. Rather, the spring pre-load affects how easily the valve opens when you lift the throttle, and how long it stays open when it vents.
Adjusting the sound When powered up the volume dial rim will glow red, and will automatically dim 3 seconds after the last adjustment to reduce unnecessary glare. The position of the dial is directly proportional the venting bias - turning the dial fully anti-clockwise sets the valve to 100% recirc, fully clockwise results in 100% atmosphere venting, and any ratio is possible in between. The controller also features a program button on the rear of the casing.