User manual
Table Of Contents
- 1 Safety Information
- 2 Parts supplied with the GEWA G9
- 3 Assembly Instructions
- 4 Explanation of Hardware Functions
- 5 Starting the Device
- 6 Before you start….
- 7 User Interface - Basics
- 8 Performance
- 9 Kit Editor
- 9.1 Module 1
- 9.2 Module 2
- 9.3 Module 3
- 9.4 Module 4
- 10 Effects
- 11 Trigger Settings
- 11.1 Module 1
- 11.2 Module 2
- 11.3 Module 3
- 11.3.1 Trigger Settings
- 11.3.2 Advanced Settings
- 11.4 Module 4
- 12 General Settings
- 13 Tools
- 13.1 On Stage
- 13.2 PDF Reader
- 13.3 File Manager
- 13.3.1 File Manager vs. Import Tool
- 13.3.2 Screen Layout and General Properties
- 13.3.3 Task Bar
- 13.3.4 Collections – Concept and Overview
- 13.3.5 Compiling Collections
- 13.3.6 Selection Rules and Methods
- 13.3.7 Collection Based Tasks -Move/Copy/Delete
- 13.3.8 Organize – New Folder and Rename
- 13.3.9 History – Undo and Redo
- 13.3.10 Closing the App
- 13.4 Utilities
- 13.5 Import Tool
- 13.6 Shop
- 14 Useful Information
- 15 Troubleshooting and possible Solutions
- 16 Technical Data
Since the functioning of this effect section is identical with the module Instrument Reverb, please
refer to the previous section for delineation of concepts, explanation of reverb types and parame-
ters.
10.8 MODULE 4
10.8.1 FX 4 MULTI EFFECTS
Effects in this module comprise everything that is not associated with Ambience, Instrument Reverb
or Room Reverb as for example frequency modulation. Results are obtained by using algorithms to
create a certain effect.
The following tables give you an overview of available algorithms and their parameters. Unlike the
reverb modules the parameters of the Multi Effects module change depending on the algorithm
selected. Mutual effect parameters are drum kit parameters and are stored directly in the kit.
Multi Effects – Mutual Parameters
Parameter
Value Range
Description
Level
-∞ - 0 dB
Controls the Level of balance between Dry and Wet signal sent to the
Mixer.
If “Dry” is turned on in FX 4 Send (see page 62) (corresponds to “Side
chain” configuration), Level will control the Balance between dry and
wet signal sent to the Mixer. With “Dry” turned off, the effect is config-
ured as an Insert type effect, where Send level and Level have
identical functionality and contribute to the presence of the effect in
the Mixer in the same fashion. Choose low fader positions for a quiet
effect and high positions for more present effects.
Send to Room Reverb
-∞ - 0 dB
With Room reverb active for the Dry sound you might also feel the
need of room simulation in multi effects as well to make both live in
the same environment. Low fader positions will send a highly attenu-
ated signal and will consequently add less room component to the
effect. High slider positions will emphasize the environment in the
effect mix
Hint
These parameters are not part of the preset management but are stored as drum kit
parameters using the direct method (Save the drum kit).
The following parameters are associated with a Drum Kit and describe the fundamental characteris-
tics of an effect. Therefore, both options of storage are available: direct method (“Custom Setting”)
and indirect method (presets). Edits in parameter values can be memorized by either saving the
Drum Kit or creating/overwriting an effect preset.