User manual

Table Of Contents

FX Sends 4

Multi Effects Send Levels / FX 4

Tom Grouping

Cymbal Grouping

-12 dB

Kick

Snare

Tom 1

Tom 2

Tom 3

Tom 4

Ride

Hi-Hat

Crash1

Crash2

Aux 1

Aux 2

Aux 3

Aux 4

Dry Signal

Hint: The default factory setting for FX Send sliders is -12 dB (centered). These values are over-

written as soon as you save the kit with deviant slider positions for the first time. Grouping of

cymbals and toms is active by default and User/Device specific. The G9 remembers the last

state for the next start. Grouping values are NOT stored with the drum kit!

10.3 EFFECT PRESET PARAMETERS

An effect module offers preset parameters, when there is a preset field on the left-hand side (mod-

ules 2-4). Such parameters are located inside the dividing, vertical bars and contain all functionali-

ties which form the fundamental characteristic of the effect. The G9 offers two distinct ways of

saving effect parameter values:

a) Saving out a preset without overwriting the effect properties of the active kit.

b) Directly into the drum kit (Save the drum kit in e.g. Performance)

Chose a) if you want to make the effect parameter values of a module available for other drum kits

as well or save the current parameters as a bookmark to explore other, alternative settings. Simply

load the preset into a kit of choice and save the kit afterwards (alternatively create a brand-new

kit). In case you neither save the kit, nor create a new one, changing the kit will restore the old

effect parameter values once you reload the drum kit in Performance Mode or Kit Editor. However,

Dry