User manual
Table Of Contents
- 1 Safety Information
- 2 Parts supplied with the GEWA G9
- 3 Assembly Instructions
- 4 Explanation of Hardware Functions
- 5 Starting the Device
- 6 Before you start….
- 7 User Interface - Basics
- 8 Performance
- 9 Kit Editor
- 9.1 Module 1
- 9.2 Module 2
- 9.3 Module 3
- 9.4 Module 4
- 10 Effects
- 11 Trigger Settings
- 11.1 Module 1
- 11.2 Module 2
- 11.3 Module 3
- 11.3.1 Trigger Settings
- 11.3.2 Advanced Settings
- 11.4 Module 4
- 12 General Settings
- 13 Tools
- 13.1 On Stage
- 13.2 PDF Reader
- 13.3 File Manager
- 13.3.1 File Manager vs. Import Tool
- 13.3.2 Screen Layout and General Properties
- 13.3.3 Task Bar
- 13.3.4 Collections – Concept and Overview
- 13.3.5 Compiling Collections
- 13.3.6 Selection Rules and Methods
- 13.3.7 Collection Based Tasks -Move/Copy/Delete
- 13.3.8 Organize – New Folder and Rename
- 13.3.9 History – Undo and Redo
- 13.3.10 Closing the App
- 13.4 Utilities
- 13.5 Import Tool
- 13.6 Shop
- 14 Useful Information
- 15 Troubleshooting and possible Solutions
- 16 Technical Data
10 EFFECTS
The G9 is equipped with 4 different effect modules. Ambience hosts environmental sam-
pling from Funkhaus Studios Berlin. Instrument Reverb and Room Reverb are two modules
addressing traditional, generic types of reverb. Under the Multi Effects part of this mode
you can control any effect that is not room simulation or reverb. Examples are echo effects or fre-
quency modulation.
This section starts out by explaining the fundamental concept of effect parameter values as well as
types of parameters between which the G9 distinguishes, followed by different ways of saving
parameter values. Finally, each effect module is discussed individually focusing on module specific
parameter properties.
10.1 EFFECT PARAMETERS
Effect parameters are the third group of parameters stored in drum kits. Hence the name drum kit
parameters. Like the drum kit parameters of the Kit Editor mode, Effects allow for storing each pa-
rameter directly into the kit.
For effect parameters that are characteristic of the effect, the G9 also provides the preset option.
This enables the user to copy effects from one kit to another. The indirect preset method of parame-
ter storage creates an additional node in the parameter hierarchy, so that the drum kit stores the
preset name, which references the different parameter values contained. The entire Effects mode
contains only drum kit parameters.
The following table gives an overview of all drum kit parameters available in Effects, and for which
of these parameters the preset option is available: