User manual

Table Of Contents
9.3.4 HI-HAT VOLUME CONTROL
This function set allows for adjusting the volume of different Hi-Hat components relative to each
other. The accessible parameters are:
Hi-Hat Volume Control - Parameters
Hi-Hat Cymbal
Hi-Hat Controller
Bow Volume
Pedal Chick Volume
Edge Volume
Pedal Splash Volume
Bell Volume
Use the sliders to adjust all component sounds relative to each other and use the Mixer function of
the Performance Mode to adjust the global Hi-Hat volume in relation to the other Input channels
(Pads).
Important: Don´t change the drum kit before saving. Edits in Hi-Hat Volume Control values as
well as Mixer values are stored with the drum kit. Changing the drum kit without saving it will
discard all modified values and restore previous values when loading the kit again.
9.4 MODULE 4
This function set hosts Equalizer and Compressor features which can be assigned to each Input
channel displayed in Module 1 of the Kit Editor Mode. Settings made in this module will be bundled
with RAW MIDI signals and will consequently be audible in the direct outs when activated. (See also
12.1.4 Routing Drums & Routing Others on page 107)
9.4.1 PAD EQUALIZER / COMPRESSOR
The G9 offers a 3-band full parametric equalizer function as well as a compressor for every input
channel/pad. Both features are implemented as insert type features. This way it is possible to shape
the sound of each connected pad individually. Pad EQ and compressors are part of the drum kit
parameters and are part of the mix audible in direct outputs and digital outs as well.