User manual

The bottom section of the Drum Kit Browser hosts the Feature Shelf which contains all preset man-
agement options. The number of options varies depending on the type of preset. The G9 distin-
guishes between user presets and factory presets. Factory presets cannot be edited or deleted;
therefore, the palette of options is restricted. See the following table for comparison:
Preset Management – Drum Kit Browser
Category
Function
Load
Save
Rename
New
Delete
Export
Import
Factory Preset
User Preset
The process of managing drum kits is the same for all features available. It starts by tapping the Drum
Kit name field, followed by a selection of the kit in the Drum Kit Browser and ends with the choice of
the function in the Feature Shelf. See the following sections for particularities of the individual func-
tions.
9.2.1.6.1 LOADING DRUM KITS
Proceed as follows:
1. Tap the [Drum Kit] field to open the Drum Kit Browser.
2. Do one of the following:
a. Highlight a Drum Kit in the list by tapping once and tap [Load] in the Feature Shelf.
b. Double tap a list entry to load the Kit.
After step 2 the drum kit browser closes automatically, and the selected kit is active. The drum kit
name in the drum kit field will update accordingly.
9.2.1.6.2 SAVING AND OVERWRITING DRUM KITS
In preparation please check if the Drum Kit name in the Drum Kit field is preceded by an asterisk (*).
Drum kits without asterisk do not possess any changed parameter values and consequently it is not
necessary to save them. Saving or overwriting a drum kit will replace all stored drum kit parameter
values by the values currently set in the UI (across all modes). With a visible asterisk proceed as
follows:
1. Tap the [Drum Kit] field to open the Drum Kit Browser.
2. Determine whether you want to save the active kit, or whether you prefer to overwrite a
different kit with the parameter values currently active in the Interface:
a. Save ➔ Do nothing, the active kit is highlighted by default.
b. Overwrite ➔ Highlight a Drum Kit in the list by tapping once.
3. Tap [Save] in the Feature Shelf.
After step 3 the drum kit browser closes automatically, and the parameter values of the drum kit
selected in step 2 are overwritten by the current parameter values of the user interface.