User manual
Table Of Contents
- 1 Safety Information
- 2 Parts supplied with the GEWA G9
- 3 Assembly Instructions
- 4 Explanation of Hardware Functions
- 5 Starting the Device
- 6 Before you start….
- 7 User Interface - Basics
- 8 Performance
- 9 Kit Editor
- 9.1 Module 1
- 9.2 Module 2
- 9.3 Module 3
- 9.4 Module 4
- 10 Effects
- 11 Trigger Settings
- 11.1 Module 1
- 11.2 Module 2
- 11.3 Module 3
- 11.3.1 Trigger Settings
- 11.3.2 Advanced Settings
- 11.4 Module 4
- 12 General Settings
- 13 Tools
- 13.1 On Stage
- 13.2 PDF Reader
- 13.3 File Manager
- 13.3.1 File Manager vs. Import Tool
- 13.3.2 Screen Layout and General Properties
- 13.3.3 Task Bar
- 13.3.4 Collections – Concept and Overview
- 13.3.5 Compiling Collections
- 13.3.6 Selection Rules and Methods
- 13.3.7 Collection Based Tasks -Move/Copy/Delete
- 13.3.8 Organize – New Folder and Rename
- 13.3.9 History – Undo and Redo
- 13.3.10 Closing the App
- 13.4 Utilities
- 13.5 Import Tool
- 13.6 Shop
- 14 Useful Information
- 15 Troubleshooting and possible Solutions
- 16 Technical Data
1. Touch the field [Tap Channel].
2. Select a pad from the drop down by double tapping.
3. Specify the desired pad component by checking one or both boxes below the Tap Chan-
nel field (Pad or Rim etc.).
All functions on the right-hand side of the Tap Channel field are identical with those in the function
set Metronome. Thus, make sure that Tap is set to “on” and Click Volume is not muted.
Tap Channel
Aux 2