User manual
Table Of Contents
- 1 Safety Information
- 2 Parts supplied with the GEWA G9
- 3 Assembly Instructions
- 4 Explanation of Hardware Functions
- 5 Starting the Device
- 6 Before you start….
- 7 User Interface - Basics
- 8 Performance
- 9 Kit Editor
- 9.1 Module 1
- 9.2 Module 2
- 9.3 Module 3
- 9.4 Module 4
- 10 Effects
- 11 Trigger Settings
- 11.1 Module 1
- 11.2 Module 2
- 11.3 Module 3
- 11.3.1 Trigger Settings
- 11.3.2 Advanced Settings
- 11.4 Module 4
- 12 General Settings
- 13 Tools
- 13.1 On Stage
- 13.2 PDF Reader
- 13.3 File Manager
- 13.3.1 File Manager vs. Import Tool
- 13.3.2 Screen Layout and General Properties
- 13.3.3 Task Bar
- 13.3.4 Collections – Concept and Overview
- 13.3.5 Compiling Collections
- 13.3.6 Selection Rules and Methods
- 13.3.7 Collection Based Tasks -Move/Copy/Delete
- 13.3.8 Organize – New Folder and Rename
- 13.3.9 History – Undo and Redo
- 13.3.10 Closing the App
- 13.4 Utilities
- 13.5 Import Tool
- 13.6 Shop
- 14 Useful Information
- 15 Troubleshooting and possible Solutions
- 16 Technical Data
G9 - Update via USB
extract
copy to ROOT
turn off
plug in
turn on
remove
reboot
Tip: Check the successful update in the information tab. Go to General Settings
➔
Module 4
➔
Information. The Firmware version should have updated accordingly. If you observe trigger
version V0, another reboot might be necessary.
Tip: In combination with the direct firmware download you can grab the unzipped firmware
from the default download folder and copy it on your USB Stick using the G9 File Manager. The
default download path for firmware files is INTERNAL SD/SYSTEM/Firmware.
Tip: Reserve a USB stick for updates only. With plugged in USB stick and firmware update files in
the root folder, the G9 enters the update routine automatically even if the firmware version is
already installed. Save time by using USB dongles with different purposes or, alternatively,
remove any *.swu file from the root directory right after the update.
12.4.6.2.2 UPDATE ROUTINE VIA MODULE
The Update section of the G9 derives its data from the default SYSTEM folder “Firmware” on the
internal SD Card. All files contained meeting the criteria for check sums, naming conventions and
version number will be considered. The latest valid firmware version will be provided for Installation.
In that sense the update section operates as a firewall for defective and modified files.
To install previously downloaded firmware, proceed as follows:
1. Go to General Settings ➔ Module 4 ➔ Update
2. Downloaded Firmware Upgrades will result in a notification in the Update Tab. Only the lat-
est version will be provided for Installation.
3. Under the section Installation tap [Show Info].
4. In the Update dialogue, tap the button [Install] below the change log.
5. Wait for the autonomous update routine to be completed (success message).
6. Confirm by tapping [Reboot].
Reboot
Reboot