User manual
Table Of Contents
- 1 Safety Information
- 2 Parts supplied with the GEWA G9
- 3 Assembly Instructions
- 4 Explanation of Hardware Functions
- 5 Starting the Device
- 6 Before you start….
- 7 User Interface - Basics
- 8 Performance
- 9 Kit Editor
- 9.1 Module 1
- 9.2 Module 2
- 9.3 Module 3
- 9.4 Module 4
- 10 Effects
- 11 Trigger Settings
- 11.1 Module 1
- 11.2 Module 2
- 11.3 Module 3
- 11.3.1 Trigger Settings
- 11.3.2 Advanced Settings
- 11.4 Module 4
- 12 General Settings
- 13 Tools
- 13.1 On Stage
- 13.2 PDF Reader
- 13.3 File Manager
- 13.3.1 File Manager vs. Import Tool
- 13.3.2 Screen Layout and General Properties
- 13.3.3 Task Bar
- 13.3.4 Collections – Concept and Overview
- 13.3.5 Compiling Collections
- 13.3.6 Selection Rules and Methods
- 13.3.7 Collection Based Tasks -Move/Copy/Delete
- 13.3.8 Organize – New Folder and Rename
- 13.3.9 History – Undo and Redo
- 13.3.10 Closing the App
- 13.4 Utilities
- 13.5 Import Tool
- 13.6 Shop
- 14 Useful Information
- 15 Troubleshooting and possible Solutions
- 16 Technical Data
The relevant folder paths are:
• Firmware: INTERNAL SD/SYSTEM/Firmware
• Manuals: INTERNAL SD/SYSTEM/Manuals
System Folders in File Manager
INTERNAL SD/SYSTEM/
Drumkits
Firmware
Manuals
QuickRecord
Custom User Folder with content
Copied Song in m4a Format.m4a
Flac Audio File.flac
12.4.6.2 UPDATE YOUR DEVICE
Important: Note that the update routine requires a specific file naming convention and file
extension in order to work correctly. Please do not rename firmware files or change their file
extension (*.swu).
12.4.6.2.1 SOFTWARE UPDATE VIA USB
Proceed as follows:
1. Extract the downloaded files.
2. Copy the firmware (edrum_fw_*.swu) to the ROOT directory of your USB stick.
3. Turn off your G9 by pressing the [Power] button.
4. Plug the USB stick into the USB port of the front panel.
5. Turn the G9 on by pressing the [Power] button again and wait for the update to be com-
pleted (pop up with status message).
6. Remove the USB stick from the USB port.
7. Tap the [Reboot] button in the status message.