User manual

Table Of Contents
a. Tap [set Name] to close the dialogue and set the name shown in the display.
b. Tap the field containing the current [Bluetooth Name] and enter a custom name us-
ing the Keyboard.
G9 Custom Bluetooth Name
Bluetooth Name
This is the name under which the
device will be visible
4. Confirm by tapping the Hook [] in the Keyboard.
12.4.4 FACTORY RESET
A factory reset will restore the default settings of the firmware version installed. The routine deletes
custom drum kits, presets and device parameters altered since the last firmware update. However, it
is possible to create a backup of drum kits using the export function of the Drum Kit Browser. The
export routine will save all drum kits in the default system folder on the internal SD card, which is
excluded from the factory reset. This way you can import your drum kits easily after the factory reset.
Sounds purchased in the Shop must be downloaded and reimported again. A firmware upgrade on
the other hand will retain all settings and drum kits. Please save your custom drum kits before you
proceed.
To perform a factory reset of the G9, proceed as follows:
1. Go to General Settings Module 4 Factory Reset
2. Tap the [Factory Reset] button.
3. Wait for the reset to be completed.
4. Confirm by tapping the hook [] in the success message dialogue.
GEWA G9
Set Name