User manual
Table Of Contents
- 1 Safety Information
- 2 Parts supplied with the GEWA G9
- 3 Assembly Instructions
- 4 Explanation of Hardware Functions
- 5 Starting the Device
- 6 Before you start….
- 7 User Interface - Basics
- 8 Performance
- 9 Kit Editor
- 9.1 Module 1
- 9.2 Module 2
- 9.3 Module 3
- 9.4 Module 4
- 10 Effects
- 11 Trigger Settings
- 11.1 Module 1
- 11.2 Module 2
- 11.3 Module 3
- 11.3.1 Trigger Settings
- 11.3.2 Advanced Settings
- 11.4 Module 4
- 12 General Settings
- 13 Tools
- 13.1 On Stage
- 13.2 PDF Reader
- 13.3 File Manager
- 13.3.1 File Manager vs. Import Tool
- 13.3.2 Screen Layout and General Properties
- 13.3.3 Task Bar
- 13.3.4 Collections – Concept and Overview
- 13.3.5 Compiling Collections
- 13.3.6 Selection Rules and Methods
- 13.3.7 Collection Based Tasks -Move/Copy/Delete
- 13.3.8 Organize – New Folder and Rename
- 13.3.9 History – Undo and Redo
- 13.3.10 Closing the App
- 13.4 Utilities
- 13.5 Import Tool
- 13.6 Shop
- 14 Useful Information
- 15 Troubleshooting and possible Solutions
- 16 Technical Data
12.4.3 BLUETOOTH
The built in Bluetooth function is useful for streaming music from an external player into the console.
To establish a Bluetooth connection, you need to follow the steps below. Note that steps 2-5 take
place on your mobile device and the procedure might vary from manufacturer to manufacturer.
Please refer to the owner’s manual of your mobile device if you have problems establishing a work-
ing Bluetooth connection:
1. In the GEWA G9 go to General Settings ➔ Module 4 ➔ Bluetooth
2. Make sure that Bluetooth is turned [on] and tap [set Bluetooth visi-
ble].
3. Turn on Bluetooth in your external device and open the list of avail-
able network connections.
4. Scan to refresh the list.
5. Select the console from the list of available devices (e.g. GEWA
G9).
6. Enter the Bluetooth password (factory default: 4392).
The password is fixed and unified for all GEWA drum consoles and digital pianos. Enter 4392 (as if you
were writing GEWA on a number pad).
Hint: Be aware of the interaction between Bluetooth and the MIX IN port. Bluetooth signals and
signals from the MIX IN port cannot be played back at the same time. As soon as Bluetooth is
turned on, audio signals from connected devices at the MIX IN port will be muted. The G9
routs the signals with priority for the last action. Consequently, plugging in an audio cable at
the MIX IN port while playing back audio via Bluetooth will mute Bluetooth audio and prioritize
MIX IN. Disabling one of these input types by either unplugging MIX IN cables or turning off
Bluetooth will cause the device to automatically switch to the other input type.
12.4.3.1 CUSTOM BLUETOOTH NAMES
If your G9 is in the close neighborhood of other G9 devices, you can change the Bluetooth name of
your G9 to make it uniquely recognizable for other external devices and facilitate the pairing pro-
cess. Bluetooth names are stored in the global device database automatically and are remem-
bered until changing the name again or until performing a Factory Reset.
Proceed as follows:
1. Go to General Settings ➔ Module 4 ➔ Bluetooth
2. Tap the [Bluetooth Name field] below [set Bluetooth visible].
3. In the dialog that opens you have two options:
GEWA G9