User manual

12.2.1.3.1 LOADING PRESETS
Proceed as follows:
1. Tap on the [Preset] field.
2. Tap once on the preset you want to load.
3. Tap [Load] in the Feature Shelf.
The dialog closes automatically, and the new preset is active.
12.2.1.3.2 SAVING NEW PRESETS
In preparation please check whether the [Preset Field] contains the name “Custom Setting”. This
indicates that values have changed and differ from those stored with the active drum kit (Pad
Equalizer and Pad Compressor) or the values stored in the device database (Output Equalizer and
Compressor).
With Custom Setting visible proceed as follows:
1. Tap the [Preset] field.
2. Tap [New] in the Feature Shelf.
3. Name your preset using the keyboard.
4. Confirm by tapping [OK].
5. (Optional for Pad EQ and Compressor) Save the active kit to replace the preset currently
stored.
Hint: A newly created preset will be added to the preset library only. It is not automatically
stored with the active drum kit. Only for Pad EQ and Compressor (Kit Editor): To ensure that the
new preset loads with the kit, you will have to additionally store the drum kit afterwards. If not,
changing the kit will load all presets from the last saving.
12.2.1.3.3 OVERWRITE PRESETS
You can overwrite user presets with current values set in the interface. This function is not available
for factory presets (preceding lock icon).
1. Tap the [Preset] field.
2. Tap on the preset name to be overwritten.
3. Tap [Save] in the Feature Shelf.
12.2.1.3.4 RENAMING PRESETS
Renaming a preset will affect the preset name only and retain individual parameter values. This
option is only available for user presets (without preceding lock icon).
1. Tap the [Preset] field.
2. Tap once on a preset name in the drop-down list.
Preset
Custom Setting