User manual
Table Of Contents
- 1 Safety Information
- 2 Parts supplied with the GEWA G9
- 3 Assembly Instructions
- 4 Explanation of Hardware Functions
- 5 Starting the Device
- 6 Before you start….
- 7 User Interface - Basics
- 8 Performance
- 9 Kit Editor
- 9.1 Module 1
- 9.2 Module 2
- 9.3 Module 3
- 9.4 Module 4
- 10 Effects
- 11 Trigger Settings
- 11.1 Module 1
- 11.2 Module 2
- 11.3 Module 3
- 11.3.1 Trigger Settings
- 11.3.2 Advanced Settings
- 11.4 Module 4
- 12 General Settings
- 13 Tools
- 13.1 On Stage
- 13.2 PDF Reader
- 13.3 File Manager
- 13.3.1 File Manager vs. Import Tool
- 13.3.2 Screen Layout and General Properties
- 13.3.3 Task Bar
- 13.3.4 Collections – Concept and Overview
- 13.3.5 Compiling Collections
- 13.3.6 Selection Rules and Methods
- 13.3.7 Collection Based Tasks -Move/Copy/Delete
- 13.3.8 Organize – New Folder and Rename
- 13.3.9 History – Undo and Redo
- 13.3.10 Closing the App
- 13.4 Utilities
- 13.5 Import Tool
- 13.6 Shop
- 14 Useful Information
- 15 Troubleshooting and possible Solutions
- 16 Technical Data
G9 Compressor
Compressor
Preset
Input
GR
Output
12.2.1.2.1 PARAMETERS AND DESCRIPTION
Compressor - Parameters
Parameter
Value Range/Unit
Description
Boost
0 - 24 dB
Amplifies the compression result to compensate for the loss in
levels caused by the Ratio setting. This parameter applies to the
full dB spectrum of the track (threshold settings are ignored).
Ratio
1.00:1 - ∞:1
Sets the amount of compression above the Threshold as a ratio
compared to the residual dB level above the Threshold. A Ratio
of 1:1 equals no compression. All other parameters won´t have
any effect.
Threshold
-∞ - 0 dB
Creates a mask or corridor in dB where the compressor is not
applied.
Knee
Hard/Soft
Determines whether the compression is faded in (soft) or
whether it is applied according to the parameter settings im-
mediately (Hard) as soon as the threshold value is exceeded.
“Soft” creates a soft line of transition around the set threshold.
Soft “blurs” the Threshold.
Attack
0.09 – 100 ms
Sets a delay time for the compressor to start working, as soon as
the level exceeds the Threshold. This way you can keep the
attack of the signal and let the compression work only on the
tail above a set threshold.
Release
15.5 ms – 6 s
Sets a delay time for the compressor to stop working, as soon as
the level drops below the Threshold.
Hint: Boost, Ratio and Threshold settings update the input-output curve. Knee, Attack and
Release values are not visible in the input-output curve.
Custom Setting
Boost
Ratio
Threshold
Knee
Attack
Release
0
-6
-18
-36
-64
0
-6
-18
-36
-64
0
-6
-18
-36
-64