User manual

12.2 MODULE 2
The second module of the General Settings mode hosts Equalizer and Compressor features for
outputs as well as Control settings for peripheral devices such as Foot Switch pedals or control via a
pad using an AUX input channel.
12.2.1 MASTER CHANNEL | HEADPHONE | MONITOR OUTS
All Outputs in this module provide a 4-band full parametric equalizer and compressors that function
in the same way. Therefore, we will discuss both features exemplary. Repeat the steps presented for
each output if necessary and take advantage of the preset function to quickly share settings be-
tween different output types. Best results are obtained with basic knowledge in audio engineering
and we recommend research of resources that cover this topic more in depth. This section will focus
on the functions provided to edit the audio mix sent to the outputs of this module.
12.2.1.1 EQUALIZER
The equalizer function mainly serves to remove unwanted signals from the audio mix, such as fre-
quencies that may cause microphone feedback in the recording environment. Since every envi-
ronment is different, the need of correction and the edits required vary significantly depending on
the situation. Consequently, the G9 only provides a constant linear factory preset for output chan-
nels which serves as a starting point. Recurring settings can be remembered by saving out user
presets. This way you avoid repeating the editing steps when returning to a known environment or
venue. The curve, that is modified by the accessible parameters displays the result of combined
effects applied to the mix. Pad Equalizers (3-Band) are implemented as Insert, so that the sound of
each pad can be shaped individually. The Insert property makes them audible in Direct Outs as well.
G9 Output Equalizer
Equalizer
Preset
Linear
Low Band
Frequency
Gain
Mid Band 2
Q
Frequency
Gain
Mid Band 1
Q
Frequency
Gain
High Band
Frequency
Gain