User manual

Curve Editor
Curve Setting
Custom 2
Save
Undo
7. (Optional) Add/remove another control point by tapping [+].
8. (Optional) Rename the curve by tapping the field [Curve Setting] to open the keyboard.
9. Tap [Save] in the Curve Editor to store the new curve shape.
10. The curve itself is a preset which will only take effect if it is assigned to a trigger bank preset
or setup. Curves that are already assigned to higher trigger preset orders will update in
trigger banks and setups immediately after saving the curve shape (step 9). In this case the
following steps are optional. Proceed as follows:
a. Storage directly in a Trigger Setup:
i. Tap the [Setup] field (module 2).
ii. Highlight a user setup tapping once on the list entry and Tap [Save] in the
Feature Shelf to update the setup. Alternatively tap [New] to create a fresh
setup for your pad configuration.
b. Storage as Trigger Bank (indirect):
i. Tap the [Trigger Bank] field (module 2).
ii. Highlight a User Trigger Bank by tapping once on the list entry and tap
[Save] to update the Trigger Bank. Alternatively tap [New] to create a fresh
Trigger Bank for your pad.
Hint: Modifying, renaming and saving already assigned user curves will not result in a “Custom
Setting” in the Trigger Bank field. Instead, the trigger bank name is retained, and saved
changes in curve shapes will update accordingly in every setup or trigger bank the curve is
assigned to. In this case you don´t need to save the trigger bank separately.
Note: Only custom trigger curves are editable!
Useful functions of the curve editor dialog:
Setup
Custom Setup
Trigger Bank
Custom Setting