User manual

G5 Owner‘s Manual | 71
Auto Pan
Parameter
Value range
Unit
Description
Rate
1-20
Hz
Controls the length of the LFO waveform period and thus the
frequency of the generated sweep.
Depth
0-127
Controls the intensity of the panning effect. Values range from 0
(equals to mono) to 127 (full alternation between the extreme
values 63L and 63R).
Bit Crusher
Parameter
Value range
Unit
Description
Bit Resolution
24, 1-16
bit
This parameter pixelates the audio signal and thus reduces the
resolution of the signal (vertical direction, bit depth).
Values: 24 (no reduction), 1 bit up to 16 bits
Down Sampling
1-16
Reduces the resolution of the wave period by lowering the sam-
pling rate. (horizontal direction, quality) Values are defined as
reduction factor and range from 1(no reduction) to 16 (reduction
to 1/16 of the original sampling rate).
Brightness
0-100
%
Bit Resolution and Down Sampling are prone to increasing the
amount of high frequencies in the output signal. Brightness adjusts
the frequency of a low pass (high cut) filter with a transition steep-
ness of 12 dB. Low control positions correspond to low filter fre-
quencies and less treble, while high control positions lead to high
filter frequencies and thus filter out less treble.